TagLine Here


3384 - Krohn-Hite Tunable Filters

Get a Quick Quote










Call for Price

3384 - Krohn-Hite Tunable Filters


200.00kHz (High end frequency limit)

The 3380 Series provides a tunable frequency range from 0.1Hz to 200kHz, and with the 002 option, the range is extended to 0.005Hz. The frequency response characteristic is selectable to either maximally flat (Butterworth) for clean filtering in the frequency domain, or linear phase (Bessel) to provide superior pulse for complex filtering.

Each channel of the 3380 Series is a selectable low-pass or high-pass, 8-pole filter providing an input gain to 50dB, and an output gain to 20dB selectable in 0.1dB steps. The 3380 Series will accept input signals to ±10V peak at 0dB gain and has selectable ac or dc coupling. Memory is available for storing a set-up of the instrument which can be recalled with a simple command.

  • Type: 8-pole, Butterworth/Bessel.
  • Attenuation Slope: 48dB/octave.
  • Tunable Frequency Range fc: 0.1Hz to 200kHz; (option 002, 0.005Hz).
  • Frequency Resolution: 0.001Hz, 0.1Hz to 0.999Hz; 3 Digits, 1Hz to 200kHz, (option 002, 0.001Hz from 0.005Hz to 0.1Hz).
  • Cutoff Frequency Accuracy: ±3%.
  • Relative Gain at fc: –3dB, Butterworth; –12.6dB, Bessel.
  • High-Pass Bandwidth (0dB Gain): >2MHz.
  • Stopband Attenuation: >80dB.
  • Wideband Noise (2MHz bandwidth detector): 0dB gain, <300µVrms. Max. gain, <25µVrms RTI.
  • Harmonic Distortion (1V input, 0dB gain): –60dB (0.1%) to 10kHz; –50dB (0.3%) to 100kHz.
  • DC Stability: Typically ±1mV/°C.
  • Input: Differential or single-ended. Pre-Filter Gain: 0dB, 10dB, 20dB, 30dB, 40dB, 50dB, ±0.2dB. Impedance: 1M ohm in parallel with 25pf.
  • Crosstalk Between Channels ( input source £50 ohms): –80dB for fsig £200kHz,–70dB for fsig >200kHz.
  • Memory: 9 stored set-ups.


Specifications
High end frequency limit
200.00kHz

Channels
4

Operation Modes
LP, HP

More Details
Four Channel Tunable Filter

Recon Test Equipment Inc is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.
Copyright © 2017 Recon Test Equipment. Powered by Zen Cart


Dawson Multimedia | Dev Blog | Web Design Orlando