TagLine Here




Product Image Item Name- Price
34901A - Multiplexer Module

34901A - Multiplexer Module

20 Channel Multiplexer (2/4-wire) Module for 34970A/34972A The Agilent 34901A module for the 34970A/34972A Data Acquisition/Switch Unit is the most versatile multiplexer for general purpose scanning. It combines dense, multi-function switching with 60 channel/second scan rates to address a broad...


Call for Price





34970A - Data Logger Switch Unit

34970A - Data Logger Switch Unit

Data Acquisition / Data Logger Switch Unit The Agilent 34970A Data Acquisition / Data Logger Switch Unit consists of a three-slot mainframe with a built-in 6 1/2 digit digital multimeter. Each channel can be configured independently to measure one of 11 different functions without the added cost or...

$595.00



83486A - Optical / Electrical Module

83486A - Optical / Electrical Module

Agilent/HP 83486A 3 GHz optical / 20 GHz electrical module Key Features: 3 GHz optical channel for 62.5/125 fibers Wavelength range: 750-860 nm Reference receiver capability (0.155/0.622/1.066/1.250 Gb/s) 20 GHz electrical channel with 3.5 mm male input

$2,000.00



83496A - Optical / Electrical Module

83496A - Optical / Electrical Module

Agilent/HP 83496A Optical / Electrical clock recovery module, 50 Mb/s 7.1 Gb/s The 83496A multi-rate electrical Clock Recovery (CR) module performs clock extraction for waveform analysis with continuous, unbanded tuning from 50 Mb/s to 13.5 Gb/s, ultra-low residual jitter and Golden Phase Locked...

$3,500.00



85024A - Probes

85024A - Probes

The Agilent 85024A high-frequency probe makes it easy to perform in-circuit measurements. An input capacitance of only 0.7 pF shunted by 1 megohm of resistance permits high frequency probing without adversely loading the circuit under test. Excellent frequency response and unity gain guarantee high...


Call for Price





85025B - Detector

85025B - Detector

The Agilent 85025B detector is designed specifically for operation with the Agilent 8757D scalar network analyzer and is not compatible with the 8756 or the 8755. The 85025B detects either a modulated (ac) or an unmodulated (dc) microwave signal. Features: Detects both ac and dc signals Impedance:...


Call for Price





85025C - Detector

85025C - Detector

The Agilent 85025C waveguide detector adapter offers a frequency range up to 110 GHz and is for use with the Agilent 8757 only in either ac or dc detection mode. Features: Used in either ac or dc detection mode Up to 110 GHz frequency range


Call for Price





85025D - Detector

85025D - Detector

The Agilent 85025D detector is designed specifically for operation with the 8757D scalar network analyzer and is not compatible with the 8756 or the 8755. The Agilent 85025D detects either a modulated (ac) or an unmodulated (dc) microwave signal. Features: Detects both ac and dc signals Frequency...


Call for Price





85025E - Detector

85025E - Detector

The Agilent 85025E detector is designed specifically for operation with the Agilent 8757D scalar network analyzer and is not compatible with the Agilent 8756 or the 8755. The 85025E detects either a modulated (ac) or an unmodulated (dc) microwave signal. Features: Detects both ac and dc signals...


Call for Price





85027A - Directional Bridges

85027A - Directional Bridges

The Agilent 85027A directional bridge is designed to operate with either the Agilent 8757 in ac or dc detection modes or with the Agilent 8756 or 8755 in ac detection mode. This bridge offers high directivity, excellent test port match, and a measurement range of up to 18 GHz in coax. Features: Can...


Call for Price






Recon Test Equipment Inc is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.
Copyright © 2017 Recon Test Equipment. Powered by Zen Cart


Dawson Multimedia | Dev Blog | Web Design Orlando