TagLine Here


83622B - Keysight / Agilent / HP Sweeper Generators

83622B - Keysight / Agilent / HP Sweeper Generators
Model: 83622B
Manufacturer: Keysight / Agilent / HP

$7,500.00

 
20.0GHz (Frequency Range Max.)
The Agilent 83622B synthesized sweeper is the standard of excellence for applications requiring the high performance and accuracy of a synthesized source and the speed and versatility of a sweep oscillator. Synthesized broadband frequency coverage and precise 1 Hz frequency resolution (Opt 008) are generated by indirect synthesis,

E8257D - Keysight / Agilent / HP Signal Generators

E8257D - Keysight / Agilent / HP Signal Generators
Model: E8257D
Manufacturer: Keysight / Agilent / HP

$55,000.00

 
67.00GHz (Frequency Range Max.)
Options: 550/007/1E1/1EA/UNU this configurations for $55K Different options configurations available please call prices starting at $25k The E8257D PSG analog signal generator delivers industry-leading output power, level accuracy, and phase noise performance up to 67 GHz (operational to 70 GHz). The E8257D PSG high output power

3588A - Keysight / Agilent / HP Spectrum Analyzers

3588A - Keysight / Agilent / HP Spectrum Analyzers
Model: 3588A
Manufacturer: Keysight / Agilent / HP

$2,700.00

 
150.00MHz (High end frequency limit)
 The Agilent 3588A spectrum analyzer provides comprehensive frequency-domain measurements and covers the baseband through IF frequency range of 10 Hz to 150 MHz. The Agilent 3588A offers high-performance spectrum measurements and simple scalar network measurements with its fully-synthesized tracking generator. Full

TLA6204 - Tektronix Logic Analyzers

TLA6204 - Tektronix Logic Analyzers
Model: TLA6204
Manufacturer: Tektronix

$12,000.00

 
136-channel Logic Analyzer module, 8 GHz timing, 235 MHz state, 2 Mb record length)
Option: 1P The affordable TLA6000 Series of logic analyzers offer the performance needed to debug, validate, and optimize the functionality of your digital system. The TLA6000 Series also provides a comprehensive set of signal integrity debug tools that allow you quickly

8341B - Keysight / Agilent / HP Sweeper Generators

8341B - Keysight / Agilent / HP Sweeper Generators
Model: 8341B
Manufacturer: Keysight / Agilent / HP

$3,500.00

 
20.0GHz (Frequency Range Max.)
Option: 004-rear panel Limited Cal Unit failed external leveling performance test at and below -50dBv. Output Impedance 50 Ohm Minimum Single-Side-Band Noise -101 dBc/Hz Maximum Single-Side-Band Noise -54 dBc/Hz Harmonics (noise) -35 dBc Non-harmonics (noise) -60 dBc Modulation FM,Pulse External Modulation Inputs(Types) No Sweep

82A04- Phase Reference Module

82A04- Phase Reference Module
Model: 82A04
Manufacturer: Tektronix

$14,000.00

 
70.0GHz (Bandwidth)
Tektronix 82A04 Phase Reference Module 60G for the DSA8300 1 Sampling Oscilloscope Features: Extremely Low Jitter

83496A - Optical / Electrical Module

83496A - Optical / Electrical Module
Model: 83496A
Manufacturer: Keysight / Agilent / HP

$3,500.00

 
Agilent/HP 83496A Optical / Electrical clock recovery module, 50 Mb/s 7.1 Gb/s The 83496A multi-rate electrical Clock Recovery (CR) module performs clock extraction for waveform analysis with continuous, unbanded tuning from 50 Mb/s to 13.5 Gb/s, ultra-low residual jitter and Golden Phase Locked Loop (PLL) operation. It provides the first true hardware Golden PLL triggering system because the

86109A - Optical / Electrical Module

86109A - Optical / Electrical Module
Model: 86109A
Manufacturer: Keysight / Agilent / HP

$8,500.00

 
The Agilent 86109A provides the widest bandwidth for measurements of very high-speed optical waveforms. The integrated, calibrated optical receiver allows for easy, precise analysis of optical signals. The flat frequency response provides low-distortion, high-fidelity measurements. An average power meter is built in. The companion electrical channel has over 40 GHz bandwidth. Key Features: 30 GHz

80A06 - PatternSync Trigger Module for the DSA8200

80A06 - PatternSync Trigger Module for the DSA8200
Model: 80A06
Manufacturer: Tektronix

$3,250.00

 
70.0GHz (Bandwidth)
Tektronix 80A06 PatternSync Trigger module is required for the DSA8200 Series when using 80SJNB advanced Jitter, Noise, and BER Analysis software package. When this module is used with the 82A04 Phase Reference module, the jitter floor is ≤200 fsRMS. The PatternSync Trigger Module is programmable to pattern lengths of up to 223 bits

DSA70804C- Tektronix Mixed Signal Oscilloscopes

DSA70804C- Tektronix Mixed Signal Oscilloscopes
Model: DSA70804C
Manufacturer: Tektronix

$28,997.00

 
Max: 1
8.0GHz (Bandwidth)
Options: ASM, DJA, MTH, PTD, 2XL, ST 8 GHz, 4 Channel Complete accessories fresh calibration Windows 7 10.5.1 BUILD 24. The Tektronix DSA70804C digital signal analyzer delivers exceptional signal acquisition performance and analysis capability. Discover real signals and capture more signal details with the DSA70804C scope's waveform capture

DSA70404C - Tektronix Mixed Signal Oscilloscopes

DSA70404C - Tektronix Mixed Signal Oscilloscopes
Model: DSA70404C
Manufacturer: Tektronix

$20,997.00

 
Max: 1
4.0GHz (Bandwidth)
Tektronix DSA70404C Options: ASM, DJA, MTH, PTD, 2XL, ST 4 Ghz, 4 channel Complete accessories Fresh calibratiln Windows 7 10.5.1 BUILD 24 The Tektronix DSA70404C is a four channel digital signal analyzer that offers a bandwidth of 4 GHz. It forms part of globally renowned test equipment manufacturer Tektronix's famous DPO/DA 7000 series of

N4861B - Probes

N4861B - Probes
Model: N4861B
Manufacturer: Keysight / Agilent / HP

$2,750.00

 
The N4851B MIPI D-PHY acquisition probe and N4861B MIPI D-PHY stimulus probe enable users to perform real-time digital serial analysis and generate real-time digital serial stimulus of the MIPI D-PHY interface. Both probes support the CSI-2 (Camera Serial interface) and DSI (Display Serial Interface), enabling users to comprehensively characterize the behavior of controllers as well as display or

83486A - Optical / Electrical Module

83486A - Optical / Electrical Module
Model: 83486A
Manufacturer: Keysight / Agilent / HP

$2,000.00

 
Agilent/HP 83486A 3 GHz optical / 20 GHz electrical module Key Features: 3 GHz optical channel for 62.5/125 fibers Wavelength range: 750-860 nm Reference receiver capability (0.155/0.622/1.066/1.250 Gb/s) 20 GHz electrical channel with 3.5 mm male input

SMY01 - Rohde & Schwarz Signal Generators

SMY01 - Rohde & Schwarz Signal Generators
Model: SMY01
Manufacturer: Rohde & Schwarz

$1,000.00

 
1.04GHz (Frequency Range Max.)
Signal generators of the Rohde & Schwarz   SMY family from Rohde&Schwarz are cost-effective instruments for testing AM, FM and jM receivers as well as for component measurements. Two models are available: R&S SMY01 with a frequency range from 9 kHz to 1040 MHzR&S SMY02 from 9 kHz to 2080 MHz Designed


Recon Test Equipment Inc is an independent distributor and is not affiliated with the manufacturers of the products it sells except where expressly noted
otherwise. Any and all trademarks or logo rights associated with the manufacturer' names and products are owned by the respective manufacturers.
Copyright © 2018 Recon Test Equipment. Powered by Zen Cart


Dawson Multimedia | Dev Blog | Web Design Orlando